About this items
| Material | Plastic |
| Color | TINA2 Basic |
| Item Dimensions LxWxH | 8.07 x 8.07 x 10.63 inches |
| Item Weight | 3 Kilograms |
- 【3D Printer for kids & beginners】The small 3D printer is fully assembled. With the simplest setup, you can use it right out of the box. The plug-and-play 3D printer can be the first 3D printer for beginners who are interested in 3D printing and modeling.
- 【High quality prints】 The entry-level 3D printer was designed with a Cartesian structure with dual linear Z-axes to ensure reliable and fast printing. Factory-ready testing, all you need is to open the box and print directly.
- 【Auto bed leveling】The printer is beginner-friendly because you no longer have to screw the bed to level it. It calibrated itself with the proximity sensor. The proximity sensor performed a 3-point alignment of the 11*12 cm build plate on the substrate at the start of printing.
- 【Magnetic build plate】It is convenient to pull the entire plate off the printing bed and bend it a little, and the prints come off. No scraper is needed and the masking tape will last longer on the build plate.
- 【Compact design】The size of the printer is 210*210*290mm. It is a good gift idea for a dorm room, children's room or classroom that needs a portable, handy printer with a small footprint.
ENTRY LEVEL 3D PRINTER FOR KIDS AND BEGINNERS - TINA2 BASIC
TINA2 is an entry level 3d printer for children and beginners. The printer is very easy to use. Fully assembled, Auto bed leveling, No complex adjustments like large printer, set up is quick and easy. You can get it up and running in minutes. The enclosed build area, 12V low voltage, unheated print bed make kids use it safely. For kids, it is a very good teaching tool to build imagination, exercise creative and practical abilities. For beginners, it is great printer to let you learn enough about the 3d printing.
Full Auto Leveling
The mini 3d printer equipped with a proximity sensor of the model: "LJ12A3-4-Z/BX'', no manual adjustments are necessary with the auto leveling solution.
Flexible and Removable Build Plate
The printed bed is a magnetic sheet that holds tightly onto the base. It is removable and flexible, you can remove prints by bending it until they lift off. You can easily replace it if it becomes damaged.
Resume Printing Function
The firmware is based on Marlin2.0 which allow you to resume a print after loss of power. This can be used to handle unplanned power outages in your place.
Knob & 2.4'' LCD Screen
Equipped with a 2.4in LCD display screen, which operated by a knob. Weefun have deeply optimized the firmware to make it easy to use.
High Quality Prints
The printer is compact and stable. It can reduce machine jitter during printing to ensure the excellent print quality.
VERY EASY TO USE
No need to assemble, only need three methods to start your print
1. Connect the filament tube to the left side extruder and insert the filament.
2. Insert the sd card and choose the model you want to print.
3. The bed auto levels and starts printing immediately.